Thermo Scientific appliedbiosystems SeqStudio Flex Series - Edit a Library Entry; Import a Library Entry; Export a Library Entry

Note: You cannot copy dye sets created by other users. You can only copy factory-provided dye
sets.
3.
T
ap Copy to make a copy of the entry.
4.
Tap a section, then modify the parameters as needed.
5.
Tap Save.
Edit a library entry
Note: Y
ou cannot edit
(Factory-provided) entr
y or
Xx
(Locked) entries. Y
ou can copy the item, then
edit the copy.
1.
In the home scr
een, tap
Actions4Libr
ary, then tap the library of interest.
2.
Tap the item to edit, then tap Open.
If the Copy button is active, you cannot edit this entry directly. See “Copy a library entry” on
page 255.
3.
Tap a section, then modify the parameters as needed.
4.
Tap Save.
Import a library entry
1.
In the home scr
een, tap
Actions4Libr
ary, then tap the library of interest.
2.
Tap Import.
3.
Tap the import location, tap the item to import, then tap Next.
A message is displayed when import is complete.
For information on connecting to a network drive, creating a folder, or changing the path, see
“Connect the instrument to a network drive (software)” on page 445.
Export a library entry
Note: Y
ou cannot export
(Factory-provided) entries.
1.
In the home scr
een, tap
Actions4Libr
ary, then tap the library of interest.
2.
Tap one or more items to export.
3.
Tap Actions4Export, tap the export location, then tap Next.
For information on connecting to a network drive, creating a folder, or changing the path, see
“Connect the instrument to a network drive (software)” on page 445.
A message is displayed when the export is complete.
Chapter 11 Manage libr
ary resources on the instrument
General library procedures
11
256
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide