Safety standards
Reference
Description
IEC 61010-1
EN 61010-1
UL 61010-1: 3rd Edition
CAN/CSA C22.2 No.
61010-1-12
Safety requirements for electrical equipment for measurement, control, and laboratory
use – Part 1: General requirements
IEC 61010-2-081
EN 61010-2-081
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-081: Requirements for automatic and semi-automatic laboratory
equipment for analysis and other purposes
IEC 60825-1 Ed.3 (2014) Radiation safety of laser products – Equipment classification, requirements. and user's
guide
21 CFR 1040.10 Radiation Control for Health and Safety Act of 1968 Performance Standard
IEC 61010-2-010
EN 61010-2-010
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-010: Particular requirements for laboratory equipment for the heating of
materials
EU Directive 2014/35/EU European Union “Low Voltage Directive”
EMC standards
Reference
Description
EU Directive 2014/30/EU European Union “EMC Directive”
EN 61326-1
IEC 61326-1
Electrical Equipment for Measurement, Control and Laboratory Use – EMC
Requirements
AS/NZS CISPR 11 Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics
of Industrial, Scientific, and Medical (ISM) Radiofrequency Equipment
ICES-001, Issue 4 Industrial, Scientific and Medical (ISM) Radio Frequency Generators
FCC Part 15 Subpart B (47
CFR)
U.S. Standard Radio Frequency Devices
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Appendix F Safety
Safety and electromagnetic compatibility (EMC) standards
F
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
555
To Next Page
Loading...
