View, export, or delete an install run history
Note: Spatial and spectral calibration reports show the date of first installation. Install run reports show
the date of the most recent installation.
1.
In the home screen, tap Actions4Maintenance4Install run4Install run history.
2.
(Optional) T
ap
Filter t
o filter the list by polymer, result, and/or dye set.
3.
To export the list of calibrations that have been run on the instrument, tap Actions4Export
report.
The install run history report contains the results of all install runs performed on the instrument.
Report file name format:
InstrumentName_InstallHistoryReport_ReportGenerationDate_Timestamp.pdf, for example:
Instrument1_InstallHistoryReport_20201124_162247.pdf
4.
To delete an install run history, tap a row, then tap
Actions4Delet
e.
IMPORTANT! At least one history for each chemistry type must be retained. If you delete the only
run history for a chemistry type, it cannot be retrieved. You will have to perform a new install run for
the chemistry type before you can perform regular runs.
5.
T
o view the details of an individual install run, tap a row, then tap View.
Chapter 12 Run calibr
ations and install checks
Perform an install run
12
352
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
To Next Page
Loading...
