Thermo Scientific appliedbiosystems SeqStudio Flex Series - Locations of RFID Read;Write Units; RFID Function

Locations of RFID read/write units
3
1
2
4
Figure 99 RFID read/write unit locations within instrument interior (shown with door open)
1
ABC RFID read/write unit (behind ABC)
2
Pouch RFID read/write unit (behind pouch)
3
CBC RFID read/write unit (behind CBC)
4
Capillary array RFID read/write unit (behind RFID label)
RFID function
The RFID r
ead/write units perform the following actions at the start of each run:
1.
Read up to 256 bytes from the RFID consumables tags.
2.
Write up to 256 bytes to the RFID consumables tags.
3.
Re-read the written data on the tags to confirm that it is accurate, using a checksum to verify data
integrity.
Appendix E Radio F
requency Identification (RFID) technology
Locations of RFID read/write units
E
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
543