Thermo Scientific appliedbiosystems SeqStudio Flex Series - User Set up for Thermo Fisher Connect

b.
Sign in to the instrument with your personal local administrator profile (username and PIN).
See “Sign in” on page 31.
c.
Enable Thermo Fisher
™
Connect on the instrument. See “Enable or disable Thermo Fisher
™
Connect access on the instrument (administrator only)” on page 228.
d.
Edit your personal local administrator profile to link to Thermo Fisher
™
Connect and obtain a
link code for the instrument. See “Re-link the instrument to your cloud profile” on page 223.
2.
Perform the following steps on Thermo Fisher
™
Connect.
a.
Access Thermo Fisher
™
Connect. See “Sign in to apps.thermofisher.com and access the
InstrumentConnect software” on page 215.
b.
In the InstrumentConnect software, click Link instrument, then enter the link code you
obtained for the instrument in substep 1d.
c.
If this is the first time you are linking, enter a PIN that you will use when you sign in to the
instrument.
3.
Perform the following steps on the instrument.
a.
Note that your user initials are updated in the home screen.
b.
Tap your user initials to display your cloud user name.
The next time you sign in to the instrument, use your cloud profile. See “Sign in to the instrument with a
cloud profile” on page 222.
You will use your local profile to sign in only if Thermo Fisher
™
Connect is not available. See “Local
profile and cloud profile: when to use, user name, and user initials” on page 213.
See also:
•
“Tasks for the cloud administrator of an instrument” on page 228
•
“Re-link the instrument to your cloud profile” on page 223
•
“Disconnect the instrument from your cloud profile” on page 224
•
“Change your cloud profile PIN” on page 225
•
“Set up email notifications from the instrument” on page 189
User set up for Thermo Fisher
™
Connect
Before a user can access Thermo Fisher
™
Connect functions, the user must do one of the following:
•
Link the instrument directly to the user's Thermofisher.com account (recommended).
•
Link the user's local profile to the user's Thermofisher.com account.
Linking overwrites a local profile user name with a cloud profile user name.
1.
Perform the following steps on the instrument.
a.
If you do not have a local profile, obtain a link code for the instrument. See “(Recommended)
Link directly to your Thermofisher.com account” on page 217.
Chapter 9 Use the instrument with Thermo Fisher
™
Connect
User set up for Thermo Fisher
™
Connect
9
212
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide