Thermo Scientific appliedbiosystems SeqStudio Flex Series - CHAPTER 5 Create a Plate File in the Plate Manager Software; Options for Creating Plate Files in the Plate Manager Software

Create a plate file in the Plate
Manager software
■
Options for creating plate files in the Plate Manager software .............................. 95
■
Get started with the Plate Manager software (desktop) .................................... 96
■
Get started with the Plate Manager software (cloud) ..................................... 105
■
Set up a plate file .................................................................... 115
■
Keyboard shortcuts and examples ..................................................... 121
■
Set up cloud analysis in the Plate Manager software (cloud) .............................. 124
■
Print the plate layout ................................................................ 125
■
Send a plate file to the Inbox on the instrument ......................................... 126
■
Additional functions in the Plate Manager software ...................................... 127
Options for creating plate files in the Plate Manager
software
The Plate Manager software (desktop) is an application for creating plate files and sending them to the
Inbox on an instrument.
The Plate Manager software (cloud) has the same features as the desktop option, plus the additional
features of setting up automatic cloud analysis and accessing SeqStudio
™
Flex Remote Monitoring.
This application requires connection to Thermo Fisher
™
Connect.
In this chapter, the Plate Manager software is referred to in the following ways:
•
If a section is specific to a platform, the software is identified as Plate Manager software (desktop)
or Plate Manager software (cloud).
•
If a section applies to both platforms, the software is identified as Plate Manager software.
5
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
95