Thermo Scientific appliedbiosystems SeqStudio Flex Series - Injection Protocol Settings

Injection protocol settings
Setting
Description
Application type Read-only setting that specifies Sequencing or F
ragment analysis.
Dye set For information, see “Dye sets library” on page 285.
Run module For information, see “Run modules library” on page 272.
You can specify up to 6 run modules for a plate. If you specify 6 run modules,
6 injections are added to the Run queue when you start a run.
Analysis settings For information, see “Analysis settings library” on page 288.
Size standard For information, see “Size standards library” on page 275.
Chapter 11 Manage library resources on the instrument
Injection protocols library
11
284
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide