Thermo Scientific appliedbiosystems SeqStudio Flex Series - Create a Plate File

Create a plate file
This section describes how to create a plate file from the library. You can also create plate files from
the Link Plate screen (accessed by tapping a plate position in the home screen) or by using the
Actions4Create plate file option (accessible from the home screen, see “Create a plate file” on
page 84). All options create a plate file in the library.
1.
In the home screen, tap Actions4Library4Plate files.
Chapter 11 Manage library resources on the instrument
Plate files library
11
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
259