Thermo Scientific appliedbiosystems SeqStudio Flex Series - Page 20

(continued)
Part Function
Radio frequency
identification (RFID) tags
(not shown in figure)
For more information,
see Appendix E, “Radio
Frequency Identification
(RFID) technology”.
RFID tags on the following primary instrument consumable labels are detected by
read/write units in the instrument interior:
•
Capillary array
•
Anode buer container (ABC)
•
Cathode buer container (CBC)
•
POP
™
polymer
The instrument reads and tracks the following information:
•
Lot numbers
•
Serial numbers
•
Dates (expiration)
•
Capacity (usage)
RFID tags are read and written in response to a user action (for example, running a
wizard or starting a run). All dashboard values are updated when RFID tags are read
and written. The days on instrument is also updated automatically every 6 minutes.
Chapter 1 Product information
Product description
1
20
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide