Thermo Scientific appliedbiosystems SeqStudio Flex Series - Page 287

Setting
Description
Chemistry standard The standard for which you are creating the dye set: Sequencing Standard or Matrix
standar
d.
Color, Dyes to calibrate,
Dyes used in samples,
Calibration peak order
Displays the dyes and the peak order for the dye set.
Peak order is the order in which matrix standard peaks appear in the spectral
calibration electropherogram. "1" is the first peak to appear (shortest fragment, left-
most in the electropherogram), and so on.
Matrix condition number
upper limit
For information, see “Spectral QV (quality value) and Condition number definitions and
limits” on page 320.
Locate start point after
scan, Locate start point
before scan
Settings that determine peak detection.
Limit scans to
Sensitivity
Minimum spectral QV For information, see “Spectral QV (quality value) and Condition number definitions and
limits” on page 320
Chapter 11 Manage library resources on the instrument
Dye sets library
11
SeqStudio
™
Flex Series Genetic Analyzer with Instrument Software v1.0 User Guide
287