176 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:ACQuire:SRATe
(see page 658)
Query Syntax
:ACQuire:SRATe?
The :ACQuire:SRATe? query returns the current oscilloscope acquisition
sample rate. The sample rate is not directly controllable.
Return Format
<sample_rate><NL>
<sample_rate> ::= sample rate in NR3 format
See Also • "Introduction to :ACQuire Commands" on page 163
• ":ACQuire:POINts" on page 170
To Next Page
Loading...
