330 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:MTESt:COUNt:TIME
(see page 658)
Query Syntax
:MTESt:COUNt:TIME?
The :MTESt:COUNt:TIME? query returns the elapsed time in the current
mask test run.
Return Format
<time><NL>
<time> ::= elapsed seconds in NR3 format.
See Also • "Introduction to :MTESt Commands" on page 320
• ":MTESt:COUNt:WAVeforms" on page 331
• ":MTESt:COUNt:FWAVeforms" on page 328
• ":MTESt:COUNt:RESet" on page 329
Example Code • "Example Code" on page 320
To Next Page
Loading...
