Agilent Technologies InfiniiVision 5000 Series

434 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TRIGger:DURation:GREaterthan
(see page 658)
Command Syntax
:TRIGger:DURation:GREaterthan <greater_than_time>[<suffix>]
<greater_than_time> ::= minimum trigger duration in seconds
in NR3 format
<suffix> ::= {s | ms | us | ns | ps }
The :TRIGger:DURation:GREaterthan command sets the minimum duration
for the defined pattern when :TRIGger:DURation:QUALifier is set to
GREaterthan. The command also sets the timeout value when the
:TRIGger:DURation:QUALifier is set to TIMeout.
Query Syntax
:TRIGger:DURation:GREaterthan?
The :TRIGger:DURation:GREaterthan? query returns the minimum duration
time for the defined pattern.
Return Format
<greater_than_time><NL>
See Also • "Introduction to :TRIGger Commands" on page 411
• ":TRIGger:DURation:PATTern" on page 436
• ":TRIGger:DURation:QUALifier" on page 437
• ":TRIGger:MODE" on page 417