508 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:WAVeform:COUNt
(see page 658)
Query Syntax
:WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the
current waveform. This may differ from current values if the unit has been
stopped and its configuration modified. For all acquisition types except
average, this value is 1.
Return Format
<count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also • "Introduction to :WAVeform Commands" on page 502
• ":ACQuire:COUNt" on page 167
• ":ACQuire:TYPE" on page 177
To Next Page
Loading...
