Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

What's New 1
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 25
What's New in Version 5.10
New features in version 5.10 of the InfiniiVision 5000 Series oscilloscope
software are:
• Segmented memory acquisition mode, enabled with Option SGM.
More detailed descriptions of the new and changed commands appear
below.
New Commands
Changed
Commands
Command Description
:ACQuire:SEGMented:COUNt (see page 172) Sets the number of memory segments.
:ACQuire:SEGMented:INDex (see page 173) Selects the segmented memory index.
:WAVeform:SEGMented:COUNt (see page 519) Returns the number of segments in the
currently acquired waveform data.
:WAVeform:SEGMented:TTAG (see page 520) Returns the time tag for the selected
segmented memory index.
Command Differences
:ACQuire:MODE (see page 169) You can now select the SEGMented memory
mode.

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English