106 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
*IDN (Identification Number)
(see page 658)
Query Syntax
*IDN?
The *IDN? query identifies the instrument type and software version.
Return Format
AGILENT TECHNOLOGIES,<model>,<serial number>,X.XX.XX <NL>
<model> ::= the model number of the instrument
<serial number> ::= the serial number of the instrument
X.XX.XX ::= the software revision of the instrument
See Also • "Introduction to Common (*) Commands" on page 99
• "*OPT (Option Identification)" on page 109
To Next Page
Loading...
