To Next Page

To Previous Page

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 155

:PRINt

(see page 658)

Command Syntax

:PRINt [<options>]

<options> ::= [<print option>][,..,<print option>]

<print option> ::= {COLor | GRAYscale | PRINter0 | BMP8bit | BMP | PNG

| NOFactors | FACTors}

The <print option> parameter may be repeated up to 5 times.

The PRINt command formats the output according to the currently

selected format (device). If an option is not specified, the value selected in

the Print Config menu is used. Refer to ":HARDcopy:FORMat" on page 581

for more information.

See Also • "Introduction to Root (:) Commands" on page 124

• "Introduction to :HARDcopy Commands" on page 246

• ":HARDcopy:FORMat" on page 581

• ":HARDcopy:FACTors" on page 249

• ":HARDcopy:GRAYscale" on page 582

• ":DISPlay:DATA" on page 211

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series