Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Status Reporting 9
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 639
Operation Status Condition Register (:OPERegister:CONDition)
The Operation Status Condition Register register hosts these bits:
The :OPERegister:CONDition? query returns the value of the Operation
Status Condition Register.
Name Location Description
RUN bit bit 3 Is set whenever the instrument is not stopped.
WAIT TRIG bit bit 5 Is set by the Trigger Armed Event Register and
indicates that the trigger is armed.
MTE bit bit 9 Comes from the Mask Test Event Registers.
OVLR bit bit 11 Is set whenever a 50Ω input overload occurs.
HWE bit bit 12 Comes from the Hardware Event Registers.

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English