Agilent Technologies InfiniiVision 5000 Series

574 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
7 Obsolete and Discontinued Commands
:EXTernal:INPut
(see page 658)
Command Syntax
:EXTernal:INPut <impedance>
<impedance> ::= {ONEMeg | FIFTy}
The :EXTernal:IMPedance command selects the input impedance setting for
the external trigger. The legal values for this command are ONEMeg (1
M
Ω) and FIFTy (50Ω).
Query Syntax
:EXTernal:INPut?
The :EXTernal:INPut? query returns the current input impedance setting
for the external trigger.
Return Format
<impedance value><NL>
<impedance value> ::= {ONEM | FIFT}
See Also • "Introduction to :EXTernal Trigger Commands" on page 218
• "Introduction to :TRIGger Commands" on page 411
• ":CHANnel<n>:IMPedance" on page 195
NOTE
The :EXTernal:INPut command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :EXTernal:IMPedance command (see page 221) instead.