Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 215
:DISPlay:PERSistence
(see page 658)
Command Syntax
:DISPlay:PERSistence <value>
<value> ::= {MINimum | INFinite}
The :DISPlay:PERSistence command specifies the persistence setting.
MINimum indicates zero persistence and INFinite indicates infinite
persistence. Use the :DISPlay:CLEar or :CDISplay root command to erase
points stored by infinite persistence.
Query Syntax
:DISPlay:PERSistence?
The :DISPlay:PERSistence? query returns the specified persistence value.
Return Format
<value><NL>
<value> ::= {MIN | INF}
See Also • "Introduction to :DISPlay Commands" on page 208
• ":DISPlay:CLEar" on page 210
• ":CDISplay" on page 131
To Next Page
Loading...
