Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

188 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:CALibrate:TIME
(see page 658)
Query Syntax
:CALibrate:TIME?
The :CALibrate:TIME? query returns the time of the last calibration.
Return Format
<date><NL>
<date> ::= hour,minutes,seconds in NR1 format
See Also • "Introduction to :CALibrate Commands" on page 179

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English