Agilent Technologies InfiniiVision 5000 Series

Obsolete and Discontinued Commands 7
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 583
:HARDcopy:IGColors
(see page 658)
Command Syntax
:HARDcopy:IGColors <value>
<value> ::= {{OFF | 0} | {ON | 1}}
The HARDcopy:IGColors command controls whether the graticule colors
are inverted or not.
Query Syntax
:HARDcopy:IGColors?
The :HARDcopy:IGColors? query returns a flag indicating whether graticule
colors are inverted or not.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also • "Introduction to :HARDcopy Commands" on page 246
NOTE
The :HARDcopy:IGColors command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :HARDcopy:INKSaver (see page 251) command instead.