Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

678 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
11 More About Oscilloscope Commands
All Oscilloscope Commands Are Sequential
IEEE 488.2 makes the distinction between sequential and overlapped
commands:
• Sequential commands finish their task before the execution of the next
command starts.
• Overlapped commands run concurrently. Commands following an
overlapped command may be started before the overlapped command is
completed.
All of the oscilloscope commands are sequential.

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English