Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 187
:CALibrate:TEMPerature
(see page 658)
Query Syntax
:CALibrate:TEMPerature?
The :CALibrate:TEMPerature? query returns the change in temperature
since the last user calibration procedure.
Return Format
<return value><NL>
<return value> ::= degrees C delta since last cal in NR3 format
See Also • "Introduction to :CALibrate Commands" on page 179

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English