Agilent Technologies InfiniiVision 5000 Series

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 357
:SAVE Commands
Save oscilloscope setups and traces, screen images, and data. See
"Introduction to :SAVE Commands" on page 358.
Table 56 :SAVE Commands Summary
Command Query Options and Query Returns
:SAVE:FILename
<base_name> (see
page 359)
:SAVE:FILename? (see
page 359)
<base_name> ::= quoted ASCII
string
:SAVE:IMAGe[:STARt]
[<file_spec>] (see
page 360)
n/a <file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-9; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
n/a :SAVE:IMAGe:AREA?
(see page 361)
<area> ::= {GRAT | SCR}
:SAVE:IMAGe:FACTors
{{0 | OFF} | {1 |
ON}} (see page 362)
:SAVE:IMAGe:FACTors?
(see page 362)
{0 | 1}
:SAVE:IMAGe:FORMat
<format> (see
page 363)
:SAVE:IMAGe:FORMat?
(see page 363)
<format> ::= {TIFF | {BMP |
BMP24bit} | BMP8bit | PNG | NONE}
:SAVE:IMAGe:INKSaver
{{0 | OFF} | {1 |
ON}} (see page 364)
:SAVE:IMAGe:INKSaver?
(see page 364)
{0 | 1}
:SAVE:IMAGe:PALette
<palette> (see
page 365)
:SAVE:IMAGe:PALette?
(see page 365)
<palette> ::= {COLor | GRAYscale
| MONochrome}
:SAVE:MASK[:STARt]
[<file_spec>] (see
page 366)
n/a <file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
:SAVE:PWD <path_name>
(see page 367)
:SAVE:PWD? (see
page 367)
<path_name> ::= quoted ASCII
string