Agilent Technologies InfiniiVision 5000 Series

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 363
:SAVE:IMAGe:FORMat
(see page 658)
Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {TIFF | {BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {TIFF | BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is
currently selected.
See Also • "Introduction to :SAVE Commands" on page 358
• ":SAVE:IMAGe[:STARt]" on page 360
• ":SAVE:IMAGe:AREA" on page 361
• ":SAVE:IMAGe:FACTors" on page 362
• ":SAVE:IMAGe:INKSaver" on page 364
• ":SAVE:IMAGe:PALette" on page 365
• ":SAVE:WAVeform:FORMat" on page 370