To Next Page

To Previous Page

Obsolete and Discontinued Commands 7

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 581

:HARDcopy:FORMat

(see page 658)

Command Syntax

:HARDcopy:FORMat <format>

<format> ::= {BMP[24bit] | BMP8bit | PNG | CSV | ASCiixy | BINary

| PRINter0 | PRINter1}

The HARDcopy:FORMat command sets the hardcopy format type.

PRINter0 and PRINter1 are only valid when printers are connected to the

oscilloscope's USB ports. (The first printer connected/identified is

PRINter0 and the second is PRINter1.)

Query Syntax

:HARDcopy:FORMat?

The :HARDcopy:FORMat? query returns the selected hardcopy format type.

Return Format

<format> ::= {BMP | BMP8 | PNG | CSV | ASC | BIN | PRIN0 | PRIN1}

See Also • "Introduction to :HARDcopy Commands" on page 246

NOTE

The :HARDcopy:FORMat command is an obsolete command provided for compatibility to

previous oscilloscopes. Use the :SAVE:IMAGe:FORMat (see page 363),

:SAVE:WAVeform:FORMat (see page 370), and :HARDcopy:APRinter (see page 248)

commands instead.

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series