Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 395
:SYSTem:LOCK
(see page 658)
Command Syntax
:SYSTem:LOCK <value>
<value> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:LOCK command disables the front panel. LOCK ON is the
equivalent of sending a local lockout message over the programming
interface.
Query Syntax
:SYSTem:LOCK?
The :SYSTem:LOCK? query returns the lock status of the front panel.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also • "Introduction to :SYSTem Commands" on page 391

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English