To Next Page

To Previous Page

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 235

:FUNCtion:GOFT:SOURce2

(see page 658)

Command Syntax

:FUNCtion:GOFT:SOURce2 <value>

<value> ::= CHANnel<n>

<n> ::= {{1 | 2} | {3 | 4}} for 4ch models, depending on SOURce1

selection

<n> ::= {1 | 2} for 2ch models

The :FUNCtion:GOFT:SOURce2 command selects the second input channel

for the g(t) source that can be used as the input to the FFT, INTegrate,

DIFFerentiate, or SQRT functions.

If CHANnel1 or CHANnel2 is selected for :FUNCtion:GOFT:SOURce1, the

SOURce2 selection can be CHANnel1 or CHANnel2. Likewise, if CHANnel3

or CHANnel4 is selected for :FUNCtion:GOFT:SOURce1, the SOURce2

selection can be CHANnel3 or CHANnel4.

Query Syntax

:FUNCtion:GOFT:SOURce2?

The :FUNCtion:GOFT:SOURce2? query returns the current selection for the

second input channel for the g(t) source.

Return Format

<n> ::= {{1 | 2} | {3 | 4}} for 4ch models, depending on SOURce1

selection

<n> ::= {1 | 2} for 2ch models

See Also • "Introduction to :FUNCtion Commands" on page 230

• ":FUNCtion:GOFT:SOURce1" on page 234

• ":FUNCtion:GOFT:OPERation" on page 233

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series