To Next Page

To Previous Page

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 365

:SAVE:IMAGe:PALette

(see page 658)

Command Syntax

:SAVE:IMAGe:PALette <palette>

<palette> ::= {COLor | GRAYscale | MONochrome}

The :SAVE:IMAGe:PALette command sets the image palette color.

Query Syntax

:SAVE:IMAGe:PALette?

The :SAVE:IMAGe:PALette? query returns the selected image palette color.

Return Format

<palette> ::= {COL | GRAY | MON}

See Also • "Introduction to :SAVE Commands" on page 358

• ":SAVE:IMAGe[:STARt]" on page 360

• ":SAVE:IMAGe:AREA" on page 361

• ":SAVE:IMAGe:FACTors" on page 362

• ":SAVE:IMAGe:FORMat" on page 363

• ":SAVE:IMAGe:INKSaver" on page 364

NOTE

MONochrome is the only valid choice when the :SAVE:IMAGe:FORMat is TIFF. COLor and

GRAYscale are the only valid choices when the format is not TIFF.

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series