Agilent Technologies InfiniiVision 5000 Series

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 479
:TRIGger:TV Commands
Table 68 :TRIGger:TV Commands Summary
Command Query Options and Query Returns
:TRIGger:TV:LINE
<line number> (see
page 480)
:TRIGger:TV:LINE?
(see page 480)
<line number> ::= integer in NR1
format
:TRIGger:TV:MODE <tv
mode> (see page 481)
:TRIGger:TV:MODE?
(see page 481)
<tv mode> ::= {FIEld1 | FIEld2 |
AFIelds | ALINes | LINE |
VERTical | LFIeld1 | LFIeld2 |
LALTernate | LVERtical}
:TRIGger:TV:POLarity
<polarity> (see
page 482)
:TRIGger:TV:POLarity?
(see page 482)
<polarity> ::= {POSitive |
NEGative}
:TRIGger:TV:SOURce
<source> (see
page 483)
:TRIGger:TV:SOURce?
(see page 483)
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 integer in NR1
format
:TRIGger:TV:STANdard
<standard> (see
page 484)
:TRIGger:TV:STANdard?
(see page 484)
<standard> ::= {GENeric | NTSC |
PALM | PAL | SECam | {P480L60HZ |
P480} | {P720L60HZ | P720} |
{P1080L24HZ | P1080} | P1080L25HZ
| {I1080L50HZ | I1080} |
I1080L60HZ}