Agilent Technologies InfiniiVision 5000 Series

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 221
:EXTernal:IMPedance
(see page 658)
Command Syntax
:EXTernal:IMPedance <value>
<value> ::= {ONEMeg | FIFTy}
The :EXTernal:IMPedance command selects the input impedance setting for
the external trigger. The legal values for this command are ONEMeg
(1 M
Ω) and FIFTy (50Ω).
Query Syntax
:EXTernal:IMPedance?
The :EXTernal:IMPedance? query returns the current input impedance
setting for the external trigger.
Return Format
<impedance value><NL>
<impedance value> ::= {ONEM | FIFT}
See Also • "Introduction to :EXTernal Trigger Commands" on page 218
• "Introduction to :TRIGger Commands" on page 411
• ":CHANnel<n>:IMPedance" on page 195