Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 435
:TRIGger:DURation:LESSthan
(see page 658)
Command Syntax
:TRIGger:DURation:LESSthan <less_than_time>[<suffix>]
<less_than_time> ::= maximum trigger duration in seconds
in NR3 format
<suffix> ::= {s | ms | us | ns | ps}
The :TRIGger:DURation:LESSthan command sets the maximum duration for
the defined pattern when :TRIGger:DURation:QUALifier is set to LESSthan.
Query Syntax
:TRIGger:DURation:LESSthan?
The :TRIGger:DURation:LESSthan? query returns the duration time for the
defined pattern.
Return Format
<less_than_time><NL>
See Also • "Introduction to :TRIGger Commands" on page 411
• ":TRIGger:DURation:PATTern" on page 436
• ":TRIGger:DURation:QUALifier" on page 437
• ":TRIGger:MODE" on page 417
To Next Page
Loading...
