406 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TIMebase:SCALe
(see page 658)
Command Syntax
:TIMebase:SCALe <scale_value>
<scale_value> ::= 1 ns through 50 s in NR3 format
The :TIMebase:SCALe command sets the horizontal scale or units per
division for the main window.
Query Syntax
:TIMebase:SCALe?
The :TIMebase:SCALe? query returns the current horizontal scale setting in
seconds per division for the main window.
Return Format
<scale_value><NL>
<scale_value> ::= 1 ns through 50 s in NR3 format
See Also • "Introduction to :TIMebase Commands" on page 400
• ":TIMebase:RANGe" on page 404
• ":TIMebase:WINDow:SCALe" on page 410
• ":TIMebase:WINDow:RANGe" on page 409
To Next Page
Loading...
