Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

404 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TIMebase:RANGe
(see page 658)
Command Syntax
:TIMebase:RANGe <range_value>
<range_value> ::= 10 ns through 500 s in NR3 format
The :TIMebase:RANGe command sets the full- scale horizontal time in
seconds for the main window. The range is 10 times the current
time- per-division setting.
Query Syntax
:TIMebase:RANGe?
The :TIMebase:RANGe query returns the current full- scale range value for
the main window.
Return Format
<range_value><NL>
<range_value> ::= 10 ns through 500 s in NR3 format
See Also • "Introduction to :TIMebase Commands" on page 400
• ":TIMebase:MODE" on page 402
• ":TIMebase:SCALe" on page 406
• ":TIMebase:WINDow:RANGe" on page 409
Example Code
' TIME_RANGE - Sets the full scale horizontal time in seconds. The
' range value is 10 times the time per division.
myScope.WriteString ":TIM:RANG 2e-3" ' Set the time range to 0.002
seconds.
Example program from the start: "VISA COM Example in Visual Basic" on
page 744

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English