To Next Page

To Previous Page

232 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:FUNCtion:DISPlay

(see page 658)

Command Syntax

:FUNCtion:DISPlay <display>

<display> ::= {{1 | ON} | {0 | OFF}}

The :FUNCtion:DISPlay command turns the display of the function on or

off. When ON is selected, the function performs as specified using the

other FUNCtion commands. When OFF is selected, function is neither

calculated nor displayed.

Query Syntax

:FUNCtion:DISPlay?

The :FUNCtion:DISPlay? query returns whether the function display is on

or off.

Return Format

<display> ::= {1 | 0}

See Also • "Introduction to :FUNCtion Commands" on page 230

• ":VIEW" on page 162

• ":BLANk" on page 130

• ":STATus" on page 159

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series