364 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:SAVE:IMAGe:INKSaver
(see page 658)
Command Syntax
:SAVE:IMAGe:INKSaver <value>
<value> ::= {{OFF | 0} | {ON | 1}}
The :SAVE:IMAGe:INKSaver command controls whether the graticule colors
are inverted or not.
Query Syntax
:SAVE:IMAGe:INKSaver?
The :SAVE:IMAGe:INKSaver? query returns a flag indicating whether
graticule colors are inverted or not.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also • "Introduction to :SAVE Commands" on page 358
• ":SAVE:IMAGe[:STARt]" on page 360
• ":SAVE:IMAGe:AREA" on page 361
• ":SAVE:IMAGe:FACTors" on page 362
• ":SAVE:IMAGe:FORMat" on page 363
• ":SAVE:IMAGe:PALette" on page 365
To Next Page
Loading...
