Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

568 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
7 Obsolete and Discontinued Commands
:CHANnel:LABel
(see page 658)
Command Syntax
:CHANnel:LABel <source_text><string>
<source_text> ::= {CHANnel1 | CHANnel2 | DIGital0,..,DIGital15}
<string> ::= quoted ASCII string
The :CHANnel:LABel command sets the source text to the string that
follows. Setting a channel will also result in the name being added to the
label list.
Query Syntax
:CHANnel:LABel?
The :CHANnel:LABel? query returns the label associated with a particular
analog channel.
Return Format
<string><NL>
<string> ::= quoted ASCII string
NOTE
The :CHANnel:LABel command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :CHANnel<n>:LABel command (see page 197) instead.

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English