To Next Page

To Previous Page

370 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:SAVE:WAVeform:FORMat

(see page 658)

Command Syntax

:SAVE:WAVeform:FORMat <format>

<format> ::= {ALB | ASCiixy | CSV | BINary}

The :SAVE:WAVeform:FORMat command sets the waveform data format

type:

• ALB — creates an Agilent module binary format file. These files can be

viewed offline by the Agilent Logic Analyzer application software. The

proper file extension for this format is ".alb".

• ASCiixy — creates comma- separated value files for each analog channel

that is displayed (turned on). The proper file extension for this format

is ".csv".

• CSV — creates one comma- separated value file that contains

information for all analog channels that are displayed (turned on). The

proper file extension for this format is ".csv".

• BINary — creates an oscilloscope binary data format file. See the User's

Guide for a description of this format. The proper file extension for this

format is ".bin".

Query Syntax

:SAVE:WAVeform:FORMat?

The :SAVE:WAVeform:FORMat? query returns the selected waveform data

format type.

Return Format

<format> ::= {ALB | ASC | CSV | BIN | NONE}

When NONE is returned, it indicates that an image file format is currently

selected.

See Also • "Introduction to :SAVE Commands" on page 358

• ":SAVE:WAVeform[:STARt]" on page 369

• ":SAVE:WAVeform:LENGth" on page 371

• ":SAVE:IMAGe:FORMat" on page 363

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series