Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 331
:MTESt:COUNt:WAVeforms
(see page 658)
Query Syntax
:MTESt:COUNt:WAVeforms?
The :MTESt:COUNt:WAVeforms? query returns the total number of
waveforms acquired in the current mask test run.
Return Format
<count><NL>
<count> ::= number of waveforms in NR1 format.
See Also • "Introduction to :MTESt Commands" on page 320
• ":MTESt:COUNt:FWAVeforms" on page 328
• ":MTESt:COUNt:TIME" on page 330
• ":MTESt:COUNt:RESet" on page 329
Example Code • "Example Code" on page 320
To Next Page
Loading...
