To Next Page

To Previous Page

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 237

:FUNCtion:OPERation

(see page 658)

Command Syntax

:FUNCtion:OPERation <operation>

<operation> ::= {ADD | SUBTract | MULTiply | INTegrate | DIFFerentiate

| FFT | SQRT}

The :FUNCtion:OPERation command sets the desired waveform math

operation:

• ADD — Source1 + source2.

• SUBTract — Source1 - source2.

• MULTiply — Source1 * source2.

• INTegrate — Integrate the selected waveform source.

• DIFFerentiate — Differentiate the selected waveform source.

• FFT — Fast Fourier Transform on the selected waveform source.

• SQRT — Square root on the selected waveform source.

When the operation is ADD, SUBTract, or MULTiply, the

:FUNCtion:SOURce1 and :FUNCtion:SOURce2 commands are used to select

source1 and source2. For all other operations, the :FUNCtion:SOURce1

command selects the waveform source.

Query Syntax

:FUNCtion:OPERation?

The :FUNCtion:OPERation? query returns the current operation for the

selected function.

Return Format

<operation> ::= {ADD | SUBT | MULT | INT | DIFF | FFT | SQRT}

See Also • "Introduction to :FUNCtion Commands" on page 230

• ":FUNCtion:SOURce1" on page 241

• ":FUNCtion:SOURce2" on page 242

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series