To Next Page

To Previous Page

382 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:SBUS:LIN:PARity

(see page 658)

Command Syntax

:SBUS:LIN:PARity <display>

<display> ::= {{1 | ON} | {0 | OFF}}

The :SBUS:LIN:PARity command determines whether the parity bits are

included as the most significant bits (MSB) in the display of the Frame Id

field in the LIN decode bus.

Query Syntax

:SBUS:LIN:PARity?

The :SBUS:LIN:PARity? query returns the current LIN parity bits display

setting of the serial decode bus.

Return Format

<display> ::= {0 | 1}

Errors • "- 241, Hardware missing" on page 617

See Also • "Introduction to :SBUS Commands" on page 374

• ":TRIGger:LIN Commands" on page 462

NOTE

This command is only valid on 4 (analog) channel oscilloscope models when the

automotive CAN and LIN serial decode option (Option AMS) has been licensed.

Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Other manuals for Agilent Technologies InfiniiVision 5000 Series