Error Messages 8
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 617
-255, Directory full
-254, Media full
-253, Corrupt media
-252, Missing media
-251, Missing mass storage
-250, Mass storage error
-241, Hardware missing
This message can occur when a feature is unavailable or unlicensed.
For example, serial bus decode commands (which require a four-channel
oscilloscope) are unavailable on two- channel oscilloscopes, and some serial
bus decode commands are only available on four- channel oscilloscopes
when the AMS (automotive serial decode) or LSS (low- speed serial
decode) options are licensed.
-240, Hardware error
-231, Data questionable
-230, Data corrupt or stale
-224, Illegal parameter value
To Next Page
Loading...
