Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

A
563
Agilent InfiniiVision 5000 Series Oscilloscopes
Programmer's Guide
7
Obsolete and Discontinued Commands
Obsolete commands are older forms of commands that are provided to
reduce customer rework for existing systems and programs (see"Obsolete
Commands" on page 658).
Obsolete Command Current Command Equivalent Behavior Differences
ANALog<n>:BWLimit :CHANnel<n>:BWLimit (see
page 192)
ANALog<n>:COUPling :CHANnel<n>:COUPling (see
page 193)
ANALog<n>:INVert :CHANnel<n>:INVert (see
page 196)
ANALog<n>:LABel :CHANnel<n>:LABel (see
page 197)
ANALog<n>:OFFSet :CHANnel<n>:OFFSet (see
page 198)
ANALog<n>:PROBe :CHANnel<n>:PROBe (see
page 199)
ANALog<n>:PMODe none
ANALog<n>:RANGe :CHANnel<n>:RANGe (see
page 204)
:CHANnel:LABel (see
page 568)
:CHANnel<n>:LABel (see
page 197)
:CHANnel2:SKEW (see
page 569)
:CHANnel<n>:PROBe:SKEW
(see page 201)
:CHANnel<n>:INPut (see
page 570)
:CHANnel<n>:IMPedance
(see page 195)
:CHANnel<n>:PMODe (see
page 571)
none
:DISPlay:CONNect (see
page 572)
:DISPlay:VECTors (see
page 217)
:ERASe (see page 573) :CDISplay (see page 131)

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English