Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

564 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
7 Obsolete and Discontinued Commands
:EXTernal:INPut (see
page 574)
:EXTernal:IMPedance (see
page 221)
:EXTernal:PMODe (see
page 575)
none
FUNCtion1, FUNCtion2 :FUNCtion Commands (see
page 228)
ADD not included
:FUNCtion:SOURce (see
page 576)
:FUNCtion:SOURce1 (see
page 241)
Obsolete command has ADD,
SUBTract, and MULTiply
parameters; current command
has GOFT parameter.
:FUNCtion:VIEW (see
page 577)
:FUNCtion:DISPlay (see
page 232)
:HARDcopy:DESTination (see
page 578)
:HARDcopy:FILename (see
page 580)
:HARDcopy:DEVice (see
page 579)
:HARDcopy:FORMat (see
page 581)
PLOTter, THINkjet not
supported; TIF, BMP, CSV,
SEIko added
:HARDcopy:FILename (see
page 580)
:RECall:FILename (see
page 352)
:SAVE:FILename (see
page 352)
:HARDcopy:FORMat (see
page 581)
:HARDcopy:APRinter (see
page 248)
:SAVE:IMAGe:FORMat (see
page 363)
:SAVE:WAVeform:FORMat
(see page 370)
:HARDcopy:GRAYscale (see
page 582)
:HARDcopy:PALette (see
page 253)
:HARDcopy:IGColors (see
page 583)
:HARDcopy:INKSaver (see
page 251)
:HARDcopy:PDRiver (see
page 584)
:HARDcopy:APRinter (see
page 248)
:MEASure:LOWer (see
page 585)
:MEASure:DEFine:THResholds
(see page 276)
MEASure:DEFine:THResholds
can define absolute values or
percentage
:MEASure:SCRatch (see
page 586)
:MEASure:CLEar (see
page 274)
:MEASure:TDELta (see
page 587)
:MARKer:XDELta (see
page 263)
Obsolete Command Current Command Equivalent Behavior Differences

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English