Agilent Technologies InfiniiVision 5000 Series

422 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TRIGger:CAN Commands
Table 61 :TRIGger:CAN Commands Summary
Command Query Options and Query Returns
:TRIGger:CAN:PATTern:
DATA <value>, <mask>
(see page 424)
:TRIGger:CAN:PATTern:
DATA? (see page 424)
<value> ::= 64-bit integer in
decimal, <nondecimal>, or
<string> (with Option AMS)
<mask> ::= 64-bit integer in
decimal, <nondecimal>, or
<string>
<nondecimal> ::= #Hnn...n where n
::= {0,..,9 | A,..,F} for
hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F} for
hexadecimal
:TRIGger:CAN:PATTern:
DATA:LENGth <length>
(see page 425)
:TRIGger:CAN:PATTern:
DATA:LENGth? (see
page 425)
<length> ::= integer from 1 to 8
in NR1 format (with Option AMS)
:TRIGger:CAN:PATTern:
ID <value>, <mask>
(see page 426)
:TRIGger:CAN:PATTern:
ID? (see page 426)
<value> ::= 32-bit integer in
decimal, <nondecimal>, or
<string> (with Option AMS)
<mask> ::= 32-bit integer in
decimal, <nondecimal>, or
<string>
<nondecimal> ::= #Hnn...n where n
::= {0,..,9 | A,..,F} for
hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F} for
hexadecimal
:TRIGger:CAN:PATTern:
ID:MODE <value> (see
page 427)
:TRIGger:CAN:PATTern:
ID:MODE? (see
page 427)
<value> ::= {STANdard | EXTended}
(with Option AMS)
:TRIGger:CAN:SAMPlepo
int <value> (see
page 428)
:TRIGger:CAN:SAMPlepo
int? (see page 428)
<value> ::= {60 | 62.5 | 68 | 70
| 75 | 80 | 87.5} in NR3 format
:TRIGger:CAN:SIGNal:B
AUDrate <baudrate>
(see page 429)
:TRIGger:CAN:SIGNal:B
AUDrate? (see
page 429)
<baudrate> ::= integer from 10000
to 1000000 in 100 b/s increments