Agilent Technologies InfiniiVision 5000 Series

To Next Page

To Previous Page

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 467

:TRIGger:LIN:STANdard

(see page 658)

Command Syntax

:TRIGger:LIN:STANdard <std>

<std> ::= {LIN13 | LIN20}

The :TRIGger:LIN:STANdard command sets the LIN standard in effect for

triggering and decoding to be LIN1.3 or LIN2.0.

Query Syntax

:TRIGger:LIN:STANdard?

The :TRIGger:LIN:STANdard? query returns the current LIN standard

setting.

Return Format

<std> ::= {LIN13 | LIN20}

See Also • "Introduction to :TRIGger Commands" on page 411

• ":TRIGger:MODE" on page 417

• ":TRIGger:LIN:SIGNal:DEFinition" on page 612

• ":TRIGger:LIN:SOURce" on page 466

Other manuals for Agilent Technologies InfiniiVision 5000 Series