Agilent Technologies InfiniiVision 5000 Series Programmer's Guide

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 531
:WAVeform:XREFerence
(see page 658)
Query Syntax
:WAVeform:XREFerence?
The :WAVeform:XREFerence? query returns the x- reference value for the
currently specified source. This value specifies the index of the data point
associated with the x-origin data value. In this product, the x-reference
point is the first point displayed and XREFerence is always 0.
Return Format
<value><NL>
<value> ::= x-reference value=0in32-bit NR1 format
See Also • "Introduction to :WAVeform Commands" on page 502
• ":WAVeform:PREamble" on page 516
• ":WAVeform:XORigin" on page 530
Example Code • "Example Code" on page 517

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English