526 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:WAVeform:TYPE
(see page 658)
Query Syntax
:WAVeform:TYPE?
The :WAVeform:TYPE? query returns the acquisition mode associated with
the currently selected waveform. The acquisition mode is set by the
:ACQuire:TYPE command.
Return Format
<mode><NL>
<mode> ::= {NORM | PEAK | AVER | HRES}
See Also • "Introduction to :WAVeform Commands" on page 502
• ":ACQuire:TYPE" on page 177
• ":WAVeform:DATA" on page 509
• ":WAVeform:PREamble" on page 516
• ":WAVeform:SOURce" on page 521
To Next Page
Loading...
