410 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TIMebase:WINDow:SCALe
(see page 658)
Command Syntax
:TIMebase:WINDow:SCALe <scale_value>
<scale_value> ::= scale value in seconds in NR3 format
The :TIMebase:WINDow:SCALe command sets the zoomed (delayed)
window horizontal scale (seconds/division). The main sweep scale
determines the range for this command. The maximum value is one half of
the :TIMebase:SCALe value.
Query Syntax
:TIMebase:WINDow:SCALe?
The :TIMebase:WINDow:SCALe? query returns the current zoomed window
scale setting.
Return Format
<scale_value><NL>
<scale_value> ::= current seconds per division for the zoomed window
See Also • "Introduction to :TIMebase Commands" on page 400
• ":TIMebase:RANGe" on page 404
• ":TIMebase:POSition" on page 403
• ":TIMebase:SCALe" on page 406
• ":TIMebase:WINDow:RANGe" on page 409
To Next Page
Loading...
